VX121P/151P/171P(-QM57)
User’s manual rev.0.0 (Preliminary)
MU-C656.xxxxxxxxxx r.0.0-EN
7 of 68
This symbol reminds you the high temperature of a device or a Panel
PC component.
1.2 Correct usage and general safety information
Warning
The Panel PC is intended for professional use only in an industrial
environment.
The information contained in this manual is intended for technical
staff who has adequate knowledge of the structures hardware and
software and of the operation of personal Panel PCs.
The equipment must be installed, maintained and serviced only by
qualified or instructed personnel in accordance with safety standards.
The Panel PC may only be used for the “Application permitted”
specified in this manual.
Appropriate transport and appropriate storage, installation and
assembly as well as careful operation and maintenance are required
to ensure that the product operates safely.
Caution
For correct usage of the Panel PC observe the following indications:
•
Read carefully this manual and that of the motherboard before
installing or using the Panel PC.
•
If on removing the Panel PC from its packaging you observe
obvious signs of damage do not connect it and inform the I.P.S.
technical service (see the “Procedures for repairing the products”
paragraph).
•
Make sure that the operating conditions (temperature and
humidity) are as indicated in the “Climatic conditions” paragraph
later in this manual.
•
Make sure that the supply voltage falls within the range indicated in
the specifications.
•
Before removing the Panel PC back cover switch the Panel PC
OFF and detach the power cord. Do not use the Panel PC without
the back cover installed. An electrical shock hazard exists. The
back cover also functions as an EMI shield.
•
While Panel PC working the back cover has to be fasten to the
chassis.
