inVENTer av100 Скачать руководство пользователя страница 20

Страница: 20 / 58

INSTALLATION AND ASSEMBLY

aV100 extract air system – Avio N 100

•

Installation and operating instructions

Installation and assembly

5.1

Instructions for proper RAL installation
NOTE

Interruption of the thermal insulation composite system.

Damage to the building structure.

►

Observe the regulations in the RAL installation guidelines!

Wall sleeves must be inserted in wall openings, aligned with a gap and finished flush to the

interior wall. Modern walls consist of multiple vertical layers which are penetrated during the

creation of the wall opening. Replace this construction as far as the wall sleeve. A similar

situation exists during the installation of windows and doors; their installation must be carried

out according to RAL

and is regulated normatively. Apply this procedure also for inVENTer

ventilation devices. In addition to the supporting and insulating properties of the walls, there are

also defined barrier layers:

Water vapour barrier

The water vapour barrier is usually in the interior wall and prevents the penetration of water va-

pour from the living space into the wall. This water vapour can condense to water at cold spots

in the wall and thus lead to thermal bridges.

Rain barrier

The rain barrier is waterproof and resists rainwater up to a certain pressure. This barrier is lo-

cated on the outside and is permeable to water vapour in order to bring the moisture out of the

wall and keep the wall sufficiently dry for a long time.

Wind barrier

Multilayered walls often have special windproof layers that are created

using film systems. Frequently, water vapour barriers also perform this function.

Expanding waterstops

Expanding waterstops complement the barrier system by flexibly filling gaps and joints between

components and masonry. They often also serve locally as rain barriers and water vapour bar-

riers.

Adhesives

Adhesives create a long-term bond between various foils.

If present, rebuild these wall layers as far as the wall sleeve. Various materials, systems and

additives are available for this purpose. Only use tested and approved materials and read the

manufacturer's working instructions thoroughly prior to use.

RAL-Gütegemeinschaft Fenster und Haustüren e.V. (RAL quality assurance association for windows and front doors) Frankfurt
am Main

Содержание av100



























































Результаты поиска

Содержание av100

Отзывы:

Похожие инструкции для av100

Бренды по названию

Популярные бренды

inVENTer av100, Инструкция по установке и эксплуатации

Результаты поиска

Содержание av100

Отзывы:

Похожие инструкции для av100

Бренды по названию

Популярные бренды