International Biomedical AeroNO 2.0 Скачать руководство пользователя страница 73

Страница: 73 / 105

Part No. 715-0088, Rev. B

- 70 -

5.11.7.2. NO

Mid-Range Reference Testing

Repeat the steps for NO Mid-Range Reference Testing (Section
5.11.6.2.) substituting NO

in place of NO, noting the following

differences.

5.11.7.2.1. Note that the AeroNOx 2.0 accuracy is 0.1 ppm for

, so displayed values need to be within this

specification.

5.11.7.2.2. Use EPA Protocol Gas, 5 ppm Nitrogen Dioxide, Balance

Air for the Mid-Range Reference gas.

5.11.7.2.3. Use the 5 ppm NO

dedicated CGA Adapter, Calibration

Circuit, and Calibration Regulator.

5.11.7.3. NO

Alarm Testing

Check the alarm function by ensuring that:

The audible and visual alarms are activated when the displayed
NO

value is at (or above) the value set on the HI alarm.

The alarm turns off when the HI alarm is adjusted up until it is
1 ppm above the displayed NO

value.

Record that the High NO

alarm is functioning by placing a

checkmark in the corresponding box on the AeroNOx 2.0 Gas
Testing Record Form.

5.11.7.4. NO Safety Shutoff Alarm

Check the safety shutoff alarm function by ensuring that:
5.11.7.4.1. When the displayed NO value exceeds the HI alarm limit

set on the display by 5 ppm (or more), the audible alarm
activates and the AeroNOx 2.0 display alternates
between the message NITRIC OFF and the measured
NO and NO

values. Set HI alarm limit by 5 ppm or

more above sampled NO value and observe.

Record this

by placing a checkmark in the corresponding box for
Safety Shutoff: Alarm on the AeroNOx 2.0 Gas
Testing Record Form.

Ensure that there is no gas flow

from the AeroNOx 2.0  delivery line.  This can be verified
using an AeroNOx 2.0  delivery line and a cup of water to
check for bubbles.

Record this by placing a checkmark

in the corresponding box for Safety Shutoff: Test on
the AeroNOx 2.0 Gas Testing Record Form.

Содержание AeroNO 2.0










































































































Результаты поиска

Содержание AeroNO 2.0

Отзывы:

International Biomedical AeroNO 2.0, Руководство по обслуживанию, Страница: 73 / 105

Результаты поиска

Содержание AeroNO 2.0

Отзывы: