Intermec Trakker Antares 2430 страница 5 Скачать руководство пользователя

Страница: 5 / 114

Trakker Antares 243X Handheld Terminal User’s Manual

iii

Document Change Record

This page records changes to this document. The document was originally released as version 001.

Version

Date

Description of Change

002

6/2002

Described new features and changes for firmware version 7.12:

•

Added a cold-temperature option and an environmental rating of IP54.

•

Added the holster accessory and included additional supported tethered scanners and cables.

•

Added support for the Wireless Transport Protocol (WTP) and modified support for the
status icons.

003

12/2002

Added information to support the 802.1x security option in firmware version 7.14.

004

5/2003

Added information to support firmware version 7.15 including:

•

Integrated E1022 linear imager

•

48-key large alphanumeric keypad

•

802.1x LEAP security

005

03/2004

Incorporated information from the

Trakker Antares 2400 Family System Manual Addendum

(P/N 073395-001).

Referenced the following new feature for firmware version 8.01:

•

Trakker Antares support on the Wavelink Avalanche client management system.

Содержание Trakker Antares 2430



















































































































Результаты поиска

Содержание Trakker Antares 2430

Отзывы:

Похожие инструкции для Trakker Antares 2430

Бренды по названию

Популярные бренды

Intermec Trakker Antares 2430, Руководство пользователя

Результаты поиска

Содержание Trakker Antares 2430

Отзывы:

Похожие инструкции для Trakker Antares 2430

Бренды по названию

Популярные бренды