Intermec Trakker Antares 2430, Руководство пользователя

Страница: 42 / 114

Chapter 1— Learning About the Terminal
nugget
39
AGaramond
28 Trakker Antares 243X Handheld Terminal User’s Manual
Symbol Connector Module
The input device connector on the standard connector module supports
non-decoded Symbol input devices. Non-decoded input devices send the
data from the scanned bar code label directly to the 243X. The 243X then
translates the data before processing it.
Serial Connector Module
The input device connector on the serial connector module supports
decoded input devices. Decoded input devices translate the data from the
scanned bar code label before sending it to the 243X. You can also attach a
serial device to this input device connector. For help, see “Connecting to a
Serial Device or Network” on page 29.
Note: The serial/power connector and the input device connector lead to
the same serial port, COM1. Do not connect more than one serial device
to the 243X.
The 243X supports different bar code symbologies depending on the type
of input device connected to the terminal. For a list of these symbologies,
see “Bar Code Symbologies” on page 86.
Connecting an Input Device
1 Use the appropriate interface cable to attach an input device to the
input device connector on the connector module. For help determining
which cable to use, see “Input Devices” on page 87.
2
Configure the Scanner Selection command and select the input device
that is connected to the terminal. For help determining how to
configure the Scanner Selection command, see “Input Devices” on page
87 and “Scanner Selection” in Chapter 6 of the 2400 Family system
manual.
Note: You must configure the Scanner Selection command. If this
command is not defined for the appropriate input device, the scanner
trigger on the input device may activate the integrated scanner on the
terminal.
Scanning Options
After you connect an input device to the 243X, you can modify the
following scanner command options to meet your needs:
• Decode Security • Scanner Selection
• Scan Ahead • Scanner Timeout
• Scanner Mode • Scanner Trigger
• Scanner Redundancy