Intermec Trakker Antares 2430, Руководство пользователя

Страница: 43 / 114

nugget
39
AGaramond
Chapter 1— Learning About the Terminal
Trakker Antares 243X Handheld Terminal User’s Manual 29
For more information about these commands, see Chapter 6,
“Configuration Command Reference,” in the 2400 Family system manual.
Connecting to a Serial Device or Network
You can physically connect the 243X to a serial device, such as a host
computer or printer, through the serial/power connector using a serial
adapter cable. If you have a serial connector module, you can use either the
serial/power connector or the input device connector to connect to a serial
device.
Input device
connector
Serial/power
connector
243XU007.eps
Serial
Connector Module
Serial connector module: This illustration shows you which connectors you can use to
connect the 243X to a serial device or network.
Note: The serial/power connector and the input device connector lead to
the same serial port, COM1. Do not connect more than one serial device
to the 243X.
To connect the 243X to a serial device using the serial/power connector
1 Attach a serial device to the serial adapter cable (P/N 216-807-001)
(sold and ordered separately).
2 Connect the serial adapter cable to the serial/power connector on the
243X.
To connect the 243X to a serial device using the input device connector
1 Attach a serial device to the RS-232 null-modem serial cable (P/N
070268) (sold and ordered separately).
2 Connect the serial cable to the input device connector on the 243X.
You can transfer data between the 243X and the serial device. For help, see
“Using Serial Communications on the Terminal” on page 51.