Intermec Trakker Antares 2430, Руководство пользователя

Страница: 75 / 114

Chapter 3— Operating the Terminal in a Network
Trakker Antares 243X Handheld Terminal User’s Manual 61
Configuring 802.1x LEAP Security
To use LEAP security on your terminal, you need:
• an authentication server that supports LEAP.
• a Cisco access point.
• a Trakker Antares terminal. Your terminal must have an 802.11b radio,
the LEAP security option, and firmware version 7.15 or later.
Note: Unlike TTLS security, LEAP security only requires the standard
2MB of memory on the terminal. It does not require the additional 4MB
memory option.
To enable 802.1x LEAP security on the terminal
1 Make sure that:
• your authentication server is properly configured. For help, see the
documentation for your authentication server.
• your Cisco access point is properly configured for LEAP security. For
help, see the documentation for your Cisco access point.
• your terminal is configured with the primary network, advanced
network, and radio parameters.
2 Configure your Cisco access point to communicate with your Trakker
Antares terminal using LEAP security.
a
Access the AP Radio Data Encryption screen. For help, see the
documentation for your Cisco access point.