Intermec EasyCoder PF2i, Руководство пользователя

Страница: 72 / 194

Chapter 2 — Connecting the Printer
58 PF2i and PF4i Mid-Range Printer User’s Manual
• Type Run “cd d:” and press Enter.
Type Run “ls” and press Enter. If the USB storage device is
supported, the contents of the USB storage device appears.
Connecting a Keyboard to the USB Host Port
You can use an external USB keyboard to input data in Fingerprint
applications. Some applications may require more complex input
from users than the simple push of a button.
The printer comes with five keyboard layouts: US, Swedish, French,
German, and User Defined.
To change the keyboard layout
1 Plug your USB keyboard into the USB host connector on the back
of the printer.
2
Turn on the printer.
3 On your printer keypad, press
T
.
4 Navigate to COM > USB KEYBOARD .
5 Choose a keyboard layout.
6 Exit Setup mode by pressing
T
again.
Connecting a Bar Code Scanner to the USB Host Port
If your printer is running Fingerprint, you can connect a HID
(Human Interface Device) bar code scanner to the printer. The
“usbhost:” device receives data from the scanner the same way it does
from a USB keyboard. You can then use this data in a Fingerprint
application.
The keyboard layout you choose (see the previous procedure) applies
for connected scanners too.