Intermec EasyCoder PF2i, Руководство пользователя

Страница: 30 / 194

Chapter 1 — Using the Printer
16 PF2i and PF4i Mid-Range Printer User’s Manual
5 Insert the media between the guides and feed the media forward
until it reaches the platen roller and stops.
6 Press the Print button while pushing the media forward. Tear off
the media by pulling it downward.
7 Close the media cover.
Loading Media for Peel-Off Printing
In peel-off, or self-strip mode, self-adhesive labels are separated from
the liner immediately after printing. Peel-off printing:
• can only be used for self-adhesive labels with liner.
• cannot be performed with optional quick-load guides installed.
• sets high demands on the media, such as label stiffness, release
characteristics of the adhesive and liner, and resistance against
electrostatic charging. Consult your media supplier or test the
media to make sure that it is suitable for your application.
• may limit registration performance when printing on labels that
have a label length of less than 25 mm (1 in).
You can also install an optional label taken sensor so that the next
copy in the batch is not printed until the current copy is removed. For
more information, see
“Accessories for the Printer” on page 145 .