Intermec EasyCoder PF2i, Руководство пользователя

Страница: 157 / 194

Appendix A — Specifications
PF2i and PF4i Mid-Range Printer User’s Manual 143
Black Mark Y-Position (f)
Intermec recommends that you place the black mark as close to the
front edge of the ticket as possible and use a negative Stop Adjust
value to control the media feed, so the tickets can be properly torn off.
Media Type
Set media type to one of these values:
• Fingerprint: TICKET (w MARK)
• IPL: MARK
Note: The black mark should be non-reflective carbon black on a
whitish background. Do not allow a perforation to break the edge of
the media, because the media may split and jam the printer.
Note: Try to avoid preprint that may interfere with the detection of
the black mark. However, if your are running Fingerprint, you can use
the command LBLCOND to temporarily disable the sensor for a
specified amount of media feed to avoid unintentional detection. For
help, see the
Intermec Fingerprint Command Reference Manual .