Intermec EasyCoder PF2i, Руководство пользователя

Страница: 118 / 194

Chapter 4 — Troubleshooting and Maintaining the Printer
104 PF2i and PF4i Mid-Range Printer User’s Manual
Resetting the Printer
When you reset the printer, you return it to the factory default
settings. Resetting the printer removes all files used to store settings.
But, it does not reset settings that have already been read when the
files. So, wireless communication settings, such as SSID and keys
retain their values from the previous start. However, the next reboot
resets them to the factory default values.
When I send a TAGREAD or
TAGWRITE command, I get this
error message: “Tag format error.” The TAGFORMAT defined for the operation determines
the number of required parameters. You may need to
modify the TAGFORMAT. For help, see the
Intermec
Fingerprint Command Reference Manual or the IPL
Command Reference Manual . For more information, see the
EPC Tag Data Standard (v1.1, revision 1.27) available from
the EPCglobal website at
www.epcglobalinc.org.
Data can be written unlawfully to a
write protected ISO 18000-6B tag. For some ISO 18000-6B tag chips, the functionality to
protect the tag memory from being rewritten has not been
implemented. Switch to tags with a different chip that have
this functionality implemented.
I can read ISO 18000-6B tags, but
when I try to read Class 1 tags, I get
this error message: “No tag found.” Class 1 tags require an MPR6100 RFID Radio Module. To
order an MPR6100 kit, contact your local Intermec
representative.
(Fingerprint only) My printer
displays an error code. Use the error code text to troubleshoot the problem:
1320
No RFID support installed.
1321 No tag found.
1322 Access outside tag memory.
1323 Tag format error.
1324 RFID inactive.
1325 Not supported by tag type.
1326 RFID module too hot.
1327 RFID duty cycle exceeded.
1328 RFID lock error. Tag cannot be locked.
1329 RFID access error. Tag is locked.
Note: If you are using Intermec Direct Protocol, error codes
1320 to 1329 are supported and displayed with the error
text.
RFID Problems and Possible Solutions (continued)
Problem Possible Solution