Intermec EasyCoder PF2i, Руководство пользователя

Страница: 116 / 194

Chapter 4 — Troubleshooting and Maintaining the Printer
102 PF2i and PF4i Mid-Range Printer User’s Manual
The transfer ribbon wrinkles. Try these possible solutions in order:
•
The ribbon break shaft may not be adjusted correctly.
For help, see
“Adjusting the Ribbon Break Shaft” on
page 112 .
•
You may need to adjust the media edge guide. For help,
see
“Loading Media” on page 7 .
•
The printhead pressure may be too high. Decrease the
printhead pressure. For help, see
“Adjusting the
Printhead Pressure” on page 111 .
The media feed is not working
properly. Try these possible solutions in order:
•
The media characteristics may have changed. Press the
Print button.
•
One of these parameters may not be properly configured:
Label rest dots, Media type, or LSS position. Verify the
settings for these parameters.
•
The sensors may be dirty. Clean the media guides. For
help, see
“Cleaning the Media Guides” on page 116 .
•
The sensors may need to be replaced. For help, contact
your Intermec service representative.
Print Quality Problems and Possible Solutions (continued)
Problem Possible Solution
Networking Problems and Possible Solutions
Problem Possible Solution
I am having problems with my
Ethernet or 802.11 radio network
connection. Try these possible solutions:
•
Make sure that your network cable is:
•
securely connected to your printer.
•
a straight “pin to pin” cable, not a “crossover” cable.
•
Make sure that your PC is correctly configured for and
connected to your network.
•
Make sure that your printer is correctly configured for
your network.
I cannot connect to my printer
home page. If you are connecting your printer with a crossover network
cable, you may need to disable the web browser’s proxy
settings on your computer to access your printer’s home
page.