If you select “All Day”, select one of the record types from the drop-down list box:
•
Continuous
: For continuous recording.
•
Motion detection:
Video is recorded when the motion is detected.
•
Alarm:
Video is recorded when the alarm is triggered via the external alarm
input.
•
Motion | Alarm:
Video is recorded when an external alarm is triggered or motion
is detected.
•
Motion & Alarm:
Video is recorded when motion
and
alarms are triggered at the
same time.
•
Face Detection
: Video is recorded when a face is detected. See “Face
detection” on page 39 for more information.
•
Cross line
: Video is recorded when the pre-defined line on-screen is crossed.
See “Cross line detection” on page 42 for more information.
•
Intrusion Detection
: Video is recorded when an intrusion is detected. See
“Intrusion detection” on page 44 for more information.
•
Scene Change detection
: Video is recorded when a change in the camera
scene is detected. See “Scene change detection” on page 47 for more
information.
•
Region entrance detection
: Video is recorded when a person or object enters
the pre-defined area.
•
Region exiting detection
: Video is recorded when a person or object leaves the
pre-defined area.
•
Unattended baggage
detection
: Video is recorded when the object is left within
the pre-defined area.
•
Audio exception detection
: Video is recorded when sounds that are above a
selected threshold.
•
Object removal detection
: Video is recorded when the object is removed from
the pre-defined area.
5. If you enable “Customize”, click the day of the week required. For period 1, set the
start and end times during which you want the camera to begin and end recording.
From the drop-down list box, select one of the record types (see the list above).
Repeat for additional periods in the day. Up to eight time periods can be selected.
Note:
The eight time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
Click
Copy
to copy the recording periods to another day of the week.
7. Click
OK
and
Save
to save changes.
Note:
If you set the record type to “Motion detection” or “Alarm”, you must also define
an arming schedule in order to trigger motion detection or alarm input recording.
62
TruVision Stainless Steel IP Cameras Configuration Manual
