Tab
Parameter descriptions
I Frame Interval
: A video compression method. It is strongly recommended
not to change the default value 50.
SVC
: Select OFF/ON to disable/enable the SVC function. Select Auto and the
device will automatically extract frames from the original video when the
network bandwidth is insufficient.
Smoothing
: Adjust the smoothness of the stream. This setting allows for
balancing of fluid movement with sharpness of resolution.
2.
Audio
Audio Encoding
: G.722.1, G.711ulaw, G.711alaw, MP2L2, G.726 and PCM
are optional.
Audio Input
: Select “LineIn” or “MicIn”
Input Volume:
Specifies the volume from 0 to 100.
Environmental Noise Filter:
Set it as OFF or ON. Enable the function to
filter background ambient noise.
3.
ROI
Enable to assign more encoding resources to the region of interest to
increase the quality of the ROI whereas the background information is less
focused when network performance is less than optimal.
4.
Display Info.
On Stream
When Dual-VCA mode is enabled, the camera sends video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.
5.
Target
Cropping
You can specify a target area on the live video, and then the specified video
area can be displayed via the third stream in certain resolution, providing
more details of the target area if needed.
To configure ROI settings:
1. From the menu toolbar, click
Configuration
>
Video/Audio
>
ROI
.
TruVision Stainless Steel IP Cameras Configuration Manual
21
