12. Choose the day and click
to set the detailed time period. You can copy the
schedule to other days.
13. Click
OK
to save changes.
14. Specify the linkage method for when an event occurs. Check one or more response
methods for the system when a motion detection alarm is triggered.
Notify Alarm Recipient
Send an exception or alarm signal to the remote management
software when an event occurs.
Send Email
Sends an email to a specified address when there is an alarm.
Note:
You must configure email settings before enabling this
option. See “To set up the email parameters” on page 17 for
further information. If you want to send the event snapshot
together with the email, check the Attached Snapshot option.
Upload Snapshot
Capture the image when an alarm is triggered and upload the
snapshot to NAS or FTP server.
Note
: To upload the snapshot to NAS, you must first configure
the NAS settings. See “NAS settings” on page 59 for further
information.
To upload the snapshot to an FTP, you must first configure the
FTP settings. See “To define the FTP parameters” on page 16
for further information. Enable the
Upload Type
option.
To upload the snapshot to FTP and NAS when motion
detection or an alarm input is triggered, you must also enable
Enable
Event-triggered Snapshot
under the snapshot
parameters. See “Snapshot parameters” on page 57 for further
information.
Trigger Channel
Triggers the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs. Select
Select All
or each individual alarm output.
Note
: This option is only supported by cameras that feature an
alarm output.
15. Click
Save
to save changes.
TruVision Stainless Steel IP Cameras Configuration Manual
35
