To set up a NAS system:
1. From the menu toolbar, click
Configuration
>
Storage
>
NAS
.
2. Enter the IP address of the network disk, and the NAS file path.
3. Click
Save
to save changes.
Storage devices
Use the storage management window to display the capacity, free space available, and
the working status of the HDD of the NAS and the SD card in the camera (if supported).
You must format these storage devices before first use.
Before formatting the storage device, stop all recording. Once formatting is completed,
reboot the camera, otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage becomes full.
Figure 18: Storage window
To format the storage devices:
1. From the menu toolbar, click
Configuration
>
Storage
>
Storage Management
.
2. Select the
HDD Number
column to select the storage.
3. Define the quota percentage for snapshots and recordings. Modify the values for
each in
Percentage of Snapshot
and
Percentage of Record
.
4. Click
Format
. A window appears to check your formatting permissions.
5. Click
OK
to start formatting.
60
TruVision Stainless Steel IP Cameras Configuration Manual
