Notify Alarm Recipient
Sends an exception or alarm signal to the remote management
software when an event occurs.
Send Email
Sends an email to a specified address when there is a scene
change detection alarm.
Note
: You must configure email settings before enabling this option.
See “To set up the email parameters” on page 17 for further
information. If you want to send the event snapshot together with
the email, select the “Attached Snapshot” option
Upload Snapshot
Capture the image when an alarm is triggered and upload the
snapshot to NAS or FTP server.
Note
: To upload the snapshot to NAS, you must first configure the
NAS settings. See “NAS settings” on page 59 for further
information.
To upload the snapshot to an FTP, you must first configure the FTP
settings. See “To define the FTP parameters” on page 16 for further
information. Enable the
Upload Type
option.
To upload the snapshot to FTP and NAS when motion detection or
an alarm input is triggered, you must also enable
Enable
Event-
triggered Snapshot
under the snapshot parameters. See
“Snapshot parameters” on page 57 for further information.
Trigger Channel
Triggers the recording to start in the camera.
Trigger Alarm Output
Triggers external alarm outputs when an event occurs. Select
Select All
or each individual alarm output.
Note
: This option is only supported by cameras that feature an
alarm output.
5. Click
Save
to save changes.
Region entrance detection
This function detects people, vehicles or other objects that enter a designated region
from outside the designated region. Certain actions can be configured to occur when
the alarm is triggered.
TruVision Stainless Steel IP Cameras Configuration Manual
49
