4. Under
Switch Day and Night Settings
, select
OFF
,
Auto D/N Switch
, or
Scheduled D/N settings
. Default is
OFF
.
Auto-switch and Scheduled-switch allow you to set different settings for day and
night as well as different periods.
5. Select
Area No.
and click
Draw Area
. Click and drag the mouse on the live video
image to draw an area sensitive to motion detection.
Note:
You can draw up to eight motion detection areas on the same image.
6. Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas marked and
restart drawing.
7. Move the
Sensitivity
slider to set the sensitivity of the detection for the selected
areas.
8. Move the
Proportion of Object on Area
slider to set the proportion of the object
that must occupy the defined area to trigger an alarm.
9. Click
Save
to save the changes for that area.
10. Repeat steps 7 to 9 for each area to be defined.
11. Click
Edit
to edit the arming schedule. See the picture below for the editing interface
of the arming schedule.
34
TruVision Stainless Steel IP Cameras Configuration Manual
