Network settings
Accessing the camera through a network requires that you define certain network
settings. Use the “Network” menu to define the network settings. See Figure 4 below for
further information.
Figure 4: Network window (TCP/IP tab shown)
Menu tabs
Description
1.
TCP/IP
NIC Type:
Enter the NIC type. Default is Auto. Other options include: 10M
Half-dup, 10M Full-dup, 100M Half-dup and 100M Full-dup.
DHCP:
Enable to automatically obtain an IP address and other network
settings from that server.
IPv4 Address:
Enter the IPv4 address of the camera.
IPv4 Subnet Mask:
Enter the IPv4 subnet mask.
IPv4 Default Gateway:
Enter the IPv4 gateway IP address.
IPv6 Mode:
Enter the IPv6 mode: Manual, DHCP or Router
Advertisement.
IPv6 Address:
Enter the IPv6 address of the camera.
IPv6 Subnet Prefix Length:
Enter the IPv6 prefix length.
IPv6 Default Gateway:
Enter the IPv6 gateway IP address.
Mac Address:
Enter the MAC address of the devices.
MTU:
Enter the valid value range of MTU. Default is 1500.
Multicast Address:
Enter a D-class IP address between 224.0.0.0 to
12
TruVision Stainless Steel IP Cameras Configuration Manual
