as define the percentage of the motion detection area that the object must occupy,
select day or night mode, and set up eight differently configured defined areas.
To set up motion detection in normal mode:
1. From the menu toolbar, click
Configuration
>
Basic Event
>
Motion Detection
.
2. Select the
Enable Motion Detection
check box. Select
Enable Dynamic Analysis
for Motion
if you want to see real-time motion events.
Note:
Select
Disable
for rules in local configuration menu if you do not want the
detected objected displayed in green frames.
3. Select
Normal
mode from the drop-down menu.
4. Click
Draw Area
. Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
Note:
You can draw up to 8 motion detection areas on the same image.
5. Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas marked and
restart drawing.
6. Move the
Sensitivity
slider to set the sensitivity of the detection. All areas will have
the same sensitivity level.
7. Click
Edit
to edit the arming schedule. See below for the editing interface of the
arming schedule.
8. Choose the day and click
to set the detailed time period. You can copy the
schedule to other days.
9. Click
OK
to save changes.
10. Specify the linkage method for when an event occurs. Select one or more response
methods for the system when a motion detection alarm is triggered.
32
TruVision Stainless Steel IP Cameras Configuration Manual
