Send Email
Sends an email to a specified address when there is an alarm
input or output alarm.
Note:
You must configure email settings before enabling this
option. See “To set up the email parameters” on page 17 for
further information. If you want to send the event snapshot
together with the email, select the Attached Snapshot option.
Upload Snapshot
Capture the image when an alarm is triggered and upload the
snapshot to NAS or FTP server.
Note:
To upload the snapshot to NAS, you must first configure
the NAS settings. See “NAS settings” on page 59 for further
information.
To upload the snapshot to an FTP, you must first configure the
FTP settings. See “To define the FTP parameters” on page 16
for further information. Enable the
Upload Type
option.
To upload the snapshot to FTP and NAS when motion
detection or an alarm input is triggered, you must also enable
Enable
Event-triggered Snapshot
under the snapshot
parameters. See “Snapshot parameters” on page 57 for further
information.
Trigger Channel
Triggers the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs. Select
Select All
or each individual alarm output.
Note:
This option is only supported by cameras that feature an
alarm output.
5. Click
Save
to save changes.
To define an alarm output:
1. From the menu toolbar, click
Configuration
>
Basic
Event
>
Alarm Output
.
2. Select an alarm output channel from the
Alarm Output
drop-down list. You can also
set a name for the alarm output.
3. The delay time can be set to 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min
.
The
delay time refers to the time duration that the alarm output remains in effect after
alarm occurs.
4. Click
Edit
to set the arming schedule for the alarm input. See “To set up motion
detection” for more information.
5. Click
Save
to save changes.
Face detection
When the face detection function is enabled, the camera can detect a human face that
is moving towards it, triggering a configurable response. The camera can only detect a
face looking directly into the camera, not side views. This feature is best suited when
the camera is in front of a door or is located in a narrow corridor.
TruVision Stainless Steel IP Cameras Configuration Manual
39
