Intergraph StudioZ RenderRAX III, Настройка системы

Страница: 67 / 94

57
PCI Slot# IRQ Priority
The Optimal default setting is Auto; the other settings are 3, 4, 5, 7, 9, 10, 11, 12, and 14.
DMA Channel (0/1/3/5/6/7)
These options allow you to specify the bus type used by each DMA channel. The settings are
PnP and ISA/EISA. The Optimal default setting is PnP.
IRQ (3/4/5/7/9/10/11/12/14/15)
These options specify the bus that the specified IRQ line is used on. These options allow you
to reserve IRQs for legacy ISA adapter cards. These options determine if the BIOS should
remove an IRQ from the pool of available IRQs passed to devices that are configurable by the
system BIOS. If more IRQs must be removed from the pool, the end user can use these
options to reserve the IRQ by assigning an ISA-EISA setting to it.
On-board I/O is configured by the BIOS. All IRQs used by on-board I/O are configured as
PCI/PnP. IRQ 12 only appears if the PS/2 Mouse Support option in Advanced CMOS Setup is
set to Disabled. The settings are ISA/EISA and PCI/PnP. In general, the Optimal default
setting is PCI/PnP. However, IRQ 5 should be set to ISA/EISA for proper operation of the
system’s Sound Blaster 16 audio card.
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA adapter cards. The
settings are Disabled, 16K, 32K, and 64K. The Optimal default setting is Disabled.
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved memory area. The
specified ROM memory area is reserved for use by legacy ISA adapter cards. This option is
disabled if the Reserved Memory Size option is set to Disabled. The Optimal default setting is
C8000.
PCI Device Search Order
The settings are First - Last and Last - First. The Optimal default setting is First - Last.
BIOS Devnode for Shadow RAM
The Optimal default setting is Disabled.