Intergraph StudioZ RenderRAX III, Настройка системы

Страница: 49 / 94

39
Understanding Disk Drive LEDs
Light-emitting diodes (LEDs) visible behind the disk drive bay door help you determine disk
drive activity and status at a glance. There are two LEDs for each disk drive, for a total of
eight disk drive LEDs. These LEDs indicate the activity and status of each disk drive installed
in the disk drive bay.
Drive Status LEDs
The right LED above each disk drive flashes to show disk activity.
On a system with RAID disk drives, an optional SCSI Activity Fault-Tolerant Enclosure
(SAF-TE) card monitors the status of RAID disk drives. The SAF-TE card causes the left
LED above each disk drive to indicate RAID disk drive status, as follows:
Left LED Activity Disk Drive Status
Off No error
Steady on Disk drive rebuild stopped or disk drive is faulty
Steady blink (approx. 1 per second) Disk drive rebuild in progress
Fast steady blink (approx. 3 per second) Disk drive identification in progress
4 fast blinks, pause (repeats) Disk drive experienced a predicted fault
2 fast blinks, pause (repeats) Disk drive is a hot spare
The left LED functions only when the SAF-TE card is installed, and the backplane is
connected to a SAF-TE compliant host bus adapter or RAID card.
To administer the RAID disk drives and the SAF-TE card, use the Mylex RAID configuration
utility as described in the Mylex RAID controller documentation delivered with the system.