Intergraph StudioZ RenderRAX III, Настройка системы

Страница: 29 / 94

19
If the system is connected to a network, get and record the following information for your
system from your network administrator:
Computer name:
Workgroup name (if the system will be part
of a workgroup):
Domain name (if the system will be part of a
Windows NT domain):
If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), get and record the appropriate TCP/IP information for your system from
your network administrator:
Internet Protocol (IP) address:
IP subnet mask:
IP domain name for your network:
IP address for your network’s default
gateway:
IP addresses for your network’s Domain
Name System (DNS) servers:
IP addresses for your network’s Windows
Internet Name Service (WINS) servers:
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT software,
make sure you install it from the \
I
386 directory on the delivery media.
Starting Operating System Setup
WARNING If you start the system, and then turn it off before completing the instructions in this
chapter, you will have to reinstall the operating system and associated system
software.
To start the system for the first time, press the Power button shown in the following figure. If
you have an AC distribution box or UPS connected to the system, make sure its power switch
is turned on before you start the system.