manualshive.com logo in svg

Intergraph StudioZ RenderRAX III, Настройка системы

Поделиться
Скачать
Intergraph StudioZ RenderRAX III Скачать руководство пользователя страница 60

50

Port 64/60 Emulation

The Optimal default setting is Disabled.

SERR#

The Optimal default setting is Disabled.

PERR#

The Optimal default setting is Disabled.

WSC# Handshake

The Optimal default setting is Enabled.

USWC Write Post

Set this option to Enabled to allow write operations from USWC memory to be posted. The
settings are Enabled and Disabled. The Optimal default setting is Enabled.

Master Latency Timer (Clks)

The settings are Disabled, 32, 64, 96, 128, 160, 192, and 224.  The Optimal default setting is
64.

Multi-Trans Timer (Clks)

The settings are Disabled, 32, 64, 96, 128, 160, 192, and 224.  The Optimal default setting is
32.

PCI1 to PCI0 Access

The Optimal default setting is Disabled.

Method of Memory Detection

Settings are Auto & SPD and Auto Only.  The Optimal default setting is Auto & SPD.

DRAM Integrity Mode

The settings are None, EC, and ECC Hardware.  The Optimal default setting is ECC
Hardware.

Содержание StudioZ RenderRAX III































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды