manualshive.com logo in svg

Intergraph StudioZ RenderRAX III, Настройка системы

Поделиться
Скачать
Intergraph StudioZ RenderRAX III Скачать руководство пользователя страница 32

22

Creating System Software Backup Diskettes

Backup diskettes for some device driver software and system software products are not
delivered with the system.  Use InterSite Version Manager, available through InterSite
Welcome, to create system software backup diskettes.

Version Manager lets you create backup diskettes containing device driver software and
system software products that were installed on the system before shipment, and which are not
available on the operating system CD-ROM.  You may need these backup diskettes later -- for
example, if you have to reinstall a device driver or the operating system.

WARNING

You must create system software backup diskettes after you set up the system
hardware and complete the operating system Setup program.  If you do not do this, you
may not be able to reinstall critical system software or the operating system if needed.

You may not have to create backup diskettes for all system software.  If Version Manager
does not list drivers or other system software products, they are available on the operating
system software CD-ROM or on backup diskettes delivered with expansion cards.

See Version Manager Help for information on creating system software backup diskettes.
Visit the Intergraph Computer Systems site on the World Wide Web and vendor bulletin
boards for new and updated drivers.

Creating a QFE Update Software Diskette

If the system requires Quick-Fix Engineering (QFE) update software, it is included in the
system software available for backup diskette creation. QFE update software contains fixes for
operating system problems or limitations, and is only shipped with the system if it is needed.

If QFE update software is shipped with the system, you should use Version Manager to create
a QFE update software diskette for use if you have to reinstall the operating system.  See the

README

.

TXT 

file on the QFE diskette for information on the applicability and installation of

QFE update software on your system.

What’s Next?

See Chapter 3, “Configuring the System,” to configure the system for use.  See Chapter 4,
“Operating Notes,” for related details.

Содержание StudioZ RenderRAX III































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды