76
To restore a configuration to the MegaRAID controller:
1. At the MegaRAID PCI Adapter Configuration Manager menu, key in 2.
CAUTION
In the next step, key in only a MegaRAID configuration file. Restoring any other file will
overwrite the binary code for setting the registers, causing damage to the RAID controller
board. The board must be replaced.
2. Key in the filename for the configuration file at the prompt. Do not include directory
paths. If you used a .MEG extension as part of the filename, include the extension. The
configuration is read from the file and saved on the RAID controller board.
3. Press
5 to exit the configuration manager.
4. Remove the MegaRAID diskette and restart the system.
