manualshive.com logo in svg

Intergraph InterRAID-8e, Руководство пользователя по оборудованию, Страница: 117 / 178

Поделиться
Скачать
Intergraph InterRAID-8e Скачать руководство пользователя страница 117

103

Flush Cache

If the MegaRAID system must be powered down rapidly, you must flush the contents of the
cache memory to preserve data integrity.  Select Flush Cache from the Adapter menu.

View Log

Select this option from the Adapter menu to display the MegaRAID event log.  The events
(errors) are stored in the RAID.log file.

Diagnostics

This option in not available.

Firmware Download

This option in not available.

Enclosure Management

Select this option from the Adapter Menu to manage the physical drives in the RAID drive
cabinets.  Each enclosure displays the status of a SCSI channel.  A red light on a drive
indicates a failed channel or drive.  Green indicates optimal conditions.

NOTE

Click on any device displayed on the enclosure management dialog to display device
information, as shown:

Содержание InterRAID-8e



















































































































































































Отзывы:

Нет отзывов