Inter-m MEQ-2000, Руководство по эксплуатации, Страница: 50 / 78

MEQ-2000 24/96 Multimode Equalizer
MEMORY MENU
Any selected parameters included in the
SETUP menu may be stored as a user preset for
later recall. In general, there are two types of presets: temporary and permanent.
Temporary presets are accessed via the PR1 and PR2 keys, and are useful for quick
comparisons of up to three setups (current, PR1 and PR2 ). Permanent presets are
recommended for storing settings for future recall.
The MEMORY menu may be easily recalled from any processing function by pressing the
MEMORY key to the right of the display.
The screen below shows the display after the MEMORY key has been pressed while the
GEQ is active. The screen opens the memory window, with the most recently used preset
highlighted.
There are five active keys in MEMORY mode:
F1 – FACT/USER toggles between FACTORY ( Fxx ) and USER ( Uxx ) preset banks.
F2 – RECALL loads the highlighted preset, overwriting the current parameters.
To keep the current parameters, use the
PR1 or PR2 temporary
preset banks before pressing RECALL .
F4 – DELETE removes the highlighted preset from the USER bank.
F5 – STORE enters the STORE menu. Appears only if USER bank is selected.
F6 – CANCEL switches back to the current settings without storing or recalling a
preset.
The F4 ( DELETE ) and F5 ( STORE ) keys are only active when the USER bank has been
selected.
For each processing module ( PEQ, GEQ, CUT, DELAY, LIMITER, COM/LIM ), eight factory
presets ( FACT ) are provided. These cannot be deleted or overwritten, but you may store
up to 32 presets per processing module in the USER bank. The first two positions in the
USER bank are dedicated for temporary presets, stored by using the quick preset keys
PR1 and PR2 .
50