Inter-m MEQ-2000, Руководство по эксплуатации, Страница: 21 / 78

MEQ-2000 24/96 Multimode Equalizer
GEQ MODE Screen
By pressing the
MODE button you can access the GEQ MODE screen, which allows for
global setup changes in the GEQ module.
In this screen, parameters are selected with the
and cursor keys and adjusted
with the parameter wheel. After every change, ENTER appears at the F5 key, and must
be pressed to confirm the change. Default settings can be selected with the F1 ( DEF )
key. Pressing the F6 ( EXIT ) key returns to the GEQ screen.
Global parameters available in the GEQ MODE screen are:
CH LINK determines the channel coupling status:
OFF selects dual channel mode, with two independent channels.
CH1 → 2 couples the channels with CH1 slaved to CH2 .
CH2 → 1 couples the channels with CH2 slaved to CH1 .
RANGE selects the adjustment range of the GEQ module:
±8dB with 0.125dB/steps, or ±16dB with 0.25 dB/steps.
TYPE selects the type of GEQ filter bank ( PARALLEL or INTERP ).
DISPLAY selects the type of GEQ display (beams or faders).
WEIGHT selects the GEQ reference according to a normalized spectrum envelope
( RTA ) stored in the RTA MODE screen (see RTA module section, page 31),
to another GEQ setting stored as reference in GEQ MODE screen(see
below), or switches it off (no reference). It is not active in ME-1 or ME-2
measurement modes.
REFERENCE selects whether to SHOW or HIDE the reference characteristics selected in
the WEIGHT menu. If SHOW is selected, the reference is added to the
display parameter. It is not active in ME-1 or ME-2 measurement modes.
After pressing the F3 ( GREF ) key, the current GEQ setup is stored for
reference in the REFERENCE parameter. This is useful for base room
equalization reference, or for compensation of system measurement
characteristics.
The default values are CH1 → 2, ±8dB, INTERP, BEAMS, OFF, HIDE .
21