Intelligent Charging TS25 MKII Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 46

background image

TS25 MKII : TS25-BAS1-KIT : TS25-BAS1-CAN-240

Battery charger/analyser : Operators Manual

11 Product Warranty

Your Intelligent Charging Limited product is guaranteed against faulty workmanship
materials and malfunction for a period of 12 months from the date of purchase, unless
agreed otherwise by Intelligent Charging Limited. Within this warranty period Intelligent
Charging Limited will undertake to repair or replace the product proved to be faulty.

We recommend you keep all packaging for the duration of the 12 month warranty, after
which you should dispose of all waste packaging in accordance with your local legislation

Products which have become faulty within the 12 month warranty period must be
returned to Intelligent Charging Limited, where Intelligent Charging Limited will then
investigate the warranty claim.

Intelligent Charging Limited products, when properly used, will render excellent service.
Therefore, users must read the User Manual and any other literature supplied with the
product carefully, and fully comply with all procedures shown in the literature and product
training / familiarisation sessions, as misuse or failure to follow the instructions may
render this warranty void.

This warranty is not transferable and excludes routine maintenance, consumables, parts
subject to normal wear and tear, service maintenance kits and damage caused by misuse
or negligence. Warranty claims attributable to improper, or careless, use or handling, and
to normal wear, are excluded from this warranty.

Intelligent Charging Limited only obligation shall be to repair or replace such products that
have proved to be faulty. Intelligent Charging Limited shall not be liable for any injury,
loss or damage, direct or consequential, arising out of the use, or the inability to use the
product. The customer shall determine the suitability of this product for its intended use,
and the customer assumes all risks and liability whatsoever in connection herewith.

Intelligent Charging Limited reserves the right to improve or modify this product

without prior notice.

Doc: DWG1044-09-R16 TS25 MKII Operators manual.odt

Page 45 of 46

Copyright Material of Intelligent Charging Limited © 2015

Printed On : 12/06/17

«
...
43
44
45
46
»

Содержание TS25 MKII















































Отзывы:

Нет отзывов

Похожие инструкции для TS25 MKII

Бренд: MOB Страницы: 6

Бренд: Hammerhead Страницы: 36

Бренд: Hamlet Страницы: 2

Бренд: ToughTested Страницы: 6

CL3.CH1018 943607

Бренд: Facom Страницы: 23

Бренд: ArSilicii Страницы: 12

Бренд: Zivan Страницы: 64

Бренд: Laser Страницы: 6

Бренд: Accusmart Страницы: 18

Бренд: Waterworld Страницы: 24

Бренд: Eagle Страницы: 2

Бренд: Hilti Страницы: 9

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 6

NEXTEC 320.30562

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 4

Бренд: Craftsman Страницы: 4

Бренд: Craftsman Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды