Intellian v240M, Инструкция по установке и эксплуатации

Страница: 99 / 177

99
OPERATION INSTRUCTION
Setting Modem Port
System MODE
Modem port MODE
Set Mediator &
modem type
Setup mode
S E T U P M O D E ?
4
Y E S N O
1. Press the LEFT arrow key to move the cursor to YES and press the OK key to enter SETUP mode.
+ A N T E N N A + S A T E L L I T E
4
+ S Y S T E M + I N S T A L L A T I O N
2. Press the DOWN arrow key to move the cursor to SYSTEM and press the OK key to enter it.
+ S E T L O C A L + S E T L O C A T I O N
4
+ M O D E M P O R T + M A N A G E M E N T
3. Press the DOWN arrow keys to move the cursor to COM. PORT and press the OK key to
enter it.
U S E M E D I A T O R M O D E M T Y P E
N O I D I R E C T - I /O
4. The USE MEDIATOR function enables the usage of the Intellian VSAT Mediator in dual
antenna configurations.
NOTE: USE MEDIATOR must be disabled if there is no MEDIATOR connected to the ACU.
Improper setting of this parameter will cause your ACU’s modem interface to work incorrectly.
MEDIATOR-ANT : DUAL ANTENNA - ONE MODEM
MEDIATOR-MODEM : ONE ANTENNA - DUAL MODEM
MEDIATOR-ALL : DUAL ANTENNA - DUAL MODEM
The MODEM TYPE* function selects a proper data communication port and protocol on the
ACU to interface with the satellite modem.
USE MEDIATOR*
•
NO
•
MEDIATOR-ANT
•
MEDIATOR-MODEM
•
MEDIATOR-ALL
MODEM TYPE
*
• USER SETTING
• IDIRECT-I/O
• IDIRECT-AMIP
• COMTECH-I/O
• COMTECH-ROSS
If you select a pre-defined modem, the modem setting is done automatically.
If you want to use a modem not listed in the extensive preset library, choose “USER SETTING”
to configure your own modem.
The next display will be shown only when you select “USER SETTING”.
• HUGHES
• SATLINK-SERIAL
• SATLINK-VACP
• ELEKTRIKOM-AMIP
• GILAT-SERIAL