Intellian v240M, Инструкция по установке и эксплуатации

Страница: 91 / 177

91
OPERATION INSTRUCTION
D V B V E R I F Y S K E W O F F S E T
D V B D E C O D E + 0 . 0
7. Edit satellite DVB VERIFY* method and SKEW OFFSET.
DVB VERIFY will be only activated and applied when DVB mode of TRACKING
SIGNAL is chosen to be used. Press the UP and DOWN arrow keys to select DVB VERIFY
and press the OK key to set the parameter.
DVB VERIFY1 *
•
AGC – use signal level for satellite tracking.
•
DVB Lock – use DVB Lock for satellite tracking.
•
DVB Decode – use DVB Decode for satellite tracking.
•
DSS Decode – use DSS Decode for satellite tracking.
R X P O L T X P O L
H O R I . V E R T .
8. Set RX POL and TX POL
To select the polarity for both RX (receive ) and TX (transmit ).
Press the UP and DOWN arrow keys to select VERTICAL, HORIZONTAL, RHCP, or LHCP.
SAT. TYPE KU : VERTICAL, HORIZONTAL
SAT.TYPE C : VERTICAL, HORIZONTAL, RHCP, or LHCP
Press the OK key to set the parameter.
D V B F R E Q . S Y M B O L N I D
0 4 0 8 0 M H z 2 7 5 0 0 K S p s 0 X 0 8 8 8
9. Set DVB FREQUENCY, SYMBOL RATE and NID when the DVB mode of TRACKING
SIGNAL is selected.
45,000 is the maximum allowed symbol rate value. NID (network ID) range is from
0x000 to 0xFFFF (hexadecimal digit).
Press the LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press the UP and DOWN arrow keys to increase or decrease the value. Or press the NUM-
BER keys to set the desired value directly. Press the OK key to set the parameter.
DVB verifiy method
Set polarity
Set DVB tracking
frequency