Intellian v240M, Инструкция по установке и эксплуатации

Страница: 125 / 177

125
APTUS
•
Satellite Information:
displays the current satellite’s name, longitude position,
and satellite skew of the satellite in the library. Tick the Edit Satellite checkbox
to edit the current satellite information.
• Tracking Common Information: displays the current LNB local oscillator
frequency that is in use and the corresponding voltage supplied. Selects
the tracking mode (DVB / NBD) to be used and sets polarization (Horizontal
/ Vertical) for the RX pol and the TX pol.
•
DVB and NBD Tracking Transponder:
sets the tracking transponder
information for either DVB trac ing mode (Verification Type, Frequency,
Symbol rate, and NID) or NBD tracking mode (Frequency and bandwidth).
• LNB Local Frequency: Displays or sets the LNB's local frequency and its
corresponding LNB voltage supplied. You may select pre-programmed
LNB LO settings from the drop down list. This procedure is the same for
both the Intellian Global VSAT PLL LNB and any other LNB.
•
Satellite Library:
you are able to edit, add, and delete the satellite library.
Add Satellite: adds the satellite information as defined in the current
settings.
Edit Satellite:
edits the satellite information of the selected satellite.
Delete Satellite: deletes the selected satellite from the library.
Get Data From ACU:
pulls the satellite information from the ACU.
Load Satellite: uploads the satellite information to the ACU.
Open from PC:
opens the satellite library file (File format: *.ilf) from
the supplied CD or from the external hard drive/PC.
Upload to ACU: uploads the satellite library to ACU.
Save to PC:
saves the current library settings to PC.