Intellian v240M, Инструкция по установке и эксплуатации

Страница: 54 / 177

v240M – Marine Satellite Communication System
54
Mounting the ACU
Intellian supplies two types of mounting methods: a 19" Rack Mount Type and a
Table Mount Type to mount the ACU.
The ACU should be installed using the two supplied 19" Rack Mounting Brackets.
Using the self-tapping screws supplied, attach the mounting brackets to the sides
of the ACU. Place the ACU in the location where it is going to be installed.
Connect the cables to the rear of the ACU.
The ACU should be installed using the two supplied Table Mounting Brackets which
allow for a top or bottom mounting configuration.
Using the self-tapping screws supplied, attach the mounting brackets to the sides of the ACU.
Place the ACU in the location where it is going to be installed.
Using a pencil to mark the 4 hole positions (2 on each side), and use the appropriate drill
bit to screw down the brackets.
Connect the cables to the rear of the ACU.
WARNING:
Ensure that the cables connected to the ACU are long enough to prevent
damage when the ACU is pulled out from the rack.
19" Rack Mount Type
Table Mount Type
Figure 65. 19" Rack Mount Type ACU
Figure 66. Table Mount Type ACU