Intellian v240M Скачать руководство пользователя страница 111

Страница: 111 / 177

111

APTUS

Figure 90. Toolbar

Quick Buttons

Files

Toolbar Menu

With the Toolbar menu, users can quickly and easily access the most commonly
used functions of Aptus

through the toolbars and icons at the top of the screen.

Setup:

enters Setup mode.

Restart:

exits Setup mode and restarts the antenna.

Reboot:

reboots the antenna.

Get Ant. Info:

obtains the information stored in the antenna

Save Satellite:

saves the current bow offset only if the antenna is tracking a

satellite. Using this function greatly reduces satellite acquisition time after an
antenna restart.

Backup:

Backups the antenna information to the ACU or PC.

• To ACU: backs up the antenna information to ACU (file format:*.ibf).

• To PC: backs up the antenna information to PC (file format: *.rpt).

Restore:

restores the antenna by using the stored information in

ACU or PC.

• From ACU: restores the antenna by using the stored information
in the ACU.

• From PC: restores the antenna by using the stored information in the PC.

Load Config. :

loads the antenna configuration file (file format: *.cfg).

The configuration file includes the antenna control parameters
which are pre-loaded at the factory and should only be changed
by an authorized service technician. Improper setting of these pa-
rameters will cause your system to perform improperly.

Содержание v240M


















































































































































































Результаты поиска

Содержание v240M

Отзывы:

Похожие инструкции для v240M

Бренды по названию

Популярные бренды

Intellian v240M, Инструкция по установке и эксплуатации

Результаты поиска

Содержание v240M

Отзывы:

Похожие инструкции для v240M

Бренды по названию

Популярные бренды