Intellian v240M, Инструкция по установке и эксплуатации

Страница: 78 / 177

v240M – Marine Satellite Communication System
78
Setup Antenna LNB pol Angle
LNB pol angle type
Setup mode
Set pol angle MODE
Antenna MODE
LNB pol angle Signal
KU
C
S E T U P M O D E ?
4
Y E S N O
1. Press the LEFT arrow key to move the cursor to YES and press the OK key to enter SETUP
mode.
4
+ A N T E N N A + S A T E L L I T E
+ S Y S T E M + I N S T A L L A T I O N
2. Press the OK key to enter the ANTENNA menu.
+ M A N U A L S E A R C H
4
+ S E T P O L A N G L E
+ S E A R C H P A R A M + S E T P A R A M E T E R S
3. Press the RIGHT arrow key to move cursor to the SET POL ANGLE menu and press the
OK key to enter it.
4. Press the UP and DOWN arrow keys to select the LNB pol angle menu and press the OK
key to run the selected operation ‘ CALIBRATION ‘ or ‘ MANUAL ADJUST‘.
Select MANUAL ADJUST to control the LNB pol angle manually. If the control board, skew
potentiometer or belt is replaced, select CALIBRATION to calibrate the LNB pol angle.
5. Press the UP and DOWN arrow keys to increase or decrease the LNB pol angle manually
and the correspondent SIGNAL level will be displayed next to it.
If the tracking satellite is a C-band satellite, the POLARITY item is shown as above.
If the tracking satellite is a Ku-band satellite, the POLARITY item is not shown.
Polarity is changeable to “LINEAR”, “RHCP”, and “LHCP” with the LEFT/RIGHT key.
Press the BACK key to return to the main display.
NOTE: LNB POL ANGLE menu will be displayed only if MANUAL ADJUST is selected.
S E L E C T L N B P O L . A N G L E M E NU
C A L I B R A T I O N
L N B P O L A N G L E P O L A R I T Y S I G N A L : 1 8 0
1 0 . 0 L I N E A R
L N B P O L A N G L E S I G N A L : 1 8 0
2 0 . 5