Intellian v240M, Инструкция по установке и эксплуатации

Страница: 120 / 177

v240M – Marine Satellite Communication System
120
• Antenna Current GPS:
displays and sets the antenna's current GPS.
• Heading:
displays and sets the ship's current heading information.
Heading Device:
None / SYNC 1:1/ SYNC 36:1/ SYNC 90:1/ SYNC 360:1/ NMEA/
NMEA2000 / Ground Test
Please note some options may not be available dependent on
model. The baud rate (4800/ 9600/ 19200/ 38400) must be set if
NMEA is selected.
• Bow Information: displays and sets the antenna's current bow.
• Skew: displays the antenna's current skew and skew offset.
Pol Sensor Calibration:
calibrates the sensor (potentiometer).
Mechanical Skew Offset: the mechanical skew offset is preset in
the factory with a default value (0, 1, or 2) depending on the
assembly status. Resets to the mechanical skew offset may be
required when the satellite skew offset is unknown (Overall system
skew offset = satellite skew mechanical skew offset). Due
to each satellite having its own skew offset, Intellian recommends
you check with your service provider or satellite operator to get the
satellite skew offset value and input it in the Satellite Work Tab
rather than resetting the mechanical skew offset directly.
• Antenna Angle: displays and sets the antenna's current absolute and
relative AZ (azimuth) position, EL (elevation) position and LNB Pol angle.
You can move the antenna's azimuth and elevation position and LNB Pol
angle by using the arrows or inputting a value to find the desired satellite
manually.
• Use Bluetooth: The data communication between the ACU and the antenna
will be terminated once the Bluetooth function is activated. The built-in
Bluetooth connection module inside of the antenna radome can enable a
PC connection right alongside the dome for diagnostic and maintenance
purposes.
Modem Lock:
turns on/off the modem lock signal sent from your
PC/laptop to the antenna while Bluetooth is in use.
Heading Connect: turns on/off the heading signal sent from your
PC/laptop to the antenna while Bluetooth is in use.