manualshive.com logo in svg

Intellian v240M, Инструкция по установке и эксплуатации

Поделиться
Скачать
Intellian v240M Скачать руководство пользователя страница 152

v240M – Marine Satellite Communication System

152

Log Downloade procedures:

1. Select the ‘Start Download’ button. 
2. To run Java applications you must have Java Runtime Environment 
    JRE) version 6.0 and above installed in your PC/ laptop when you
    access the antenna log page for first time. Click the “Run” button on  
    the popup message “The application’s digital signature cannot be 
    verified. Do you want to run the application? ” to install the Applet.
    Refer to the Appendix for Java Installation Instructions if the system 
    does not display the popup message.

3. Select the ‘Browse’ button to browse the target directory of the antenna log file.
4. Select the log period for file download.
    - 

Last 3 Months: download the antenna log information for the past three 

             months.
    - 

Last 1 Month: download the antenna log informaiton for the past one month. 

    - 

Last 1 week: download the antenna log information for the past one week.

    - 

Last 1 Day: download the antenna log information for the past one day.

5. Select ‘Download’to download the log file to the target directory according to the 
    selected log period.

NOTE: 

You can choose to Enable or Disable the GPS tracking function. Liability for 

information that is disclosed when GPS is enabled is solely the operators responsibility 
and it is up to the operator on whether or not to provide their GPS information to third 
parties. Any issues regarding safety and privacy when turning on the GPS function is 
solely up to the user. Intellian is not responsible for information that is disclosed when 
the GPS function is enabled.

Содержание v240M


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды