Intel STEL-2176 Скачать руководство пользователя страница 65

Страница: 65 / 80

Transmitter Description

STEL-2176

User Manual

Interpolation Filt.
Bypass

Controls the number of filter stages the Interpolation Filter will use for filtering the
signal.

Interpolation Filter
Gain Control

Sets the gain of the Interpolation Filter.

Invert I/Q Chan.

Controls the signal inversion of the I and Q channels by using an adder to add or
subtract the two channels.

Defines the length of the User Data Packet in bytes.

LDLSBF

Determines whether the MSB or LSB of the checksum byte is to be output as the first bit
of the serial output data.

LSB Sampling Rate
Control

A 12-bit word that controls the sampling rate of the 10-Bit DAC. Register 29 contains the
8 LSBs and Register 39 contains the 4 MSBs.

MOD

Selects type of modulation (BPSK, QPSK, or 16QAM).

NCO

Three 24-bit frequency control words. The word selected for setting the frequency of the
NCO carrier is selected by the input pins TXFCWSEL[1-0] .

PN Code Sel

Selects one of two PN codes when pseudo-random generator is enabled.

PN On/Off

Enables or disables the pseudo-random generator

PPolynomial

Selects one of two primitive polynomials for use with the Reed-Solomon Encoder for

encoding data.

RSENBPB

Allows the Reed-Solomon Encoder to be bypassed.

RSENSEL

Selects software (RSENBPB) or hardware (input pin 117) control for enabling the Reed-

Solomon Encoder.

SCRAMBLER Init
Registers

A 24-bit word that is loaded into the PN generator to initialize its shift register.

SCRAMBLER Mask
Registers

A 24-bit word that is masks the output of the PN generator shift register.

SCRMENBPB

Allows the Scrambler to be bypassed.

SCRMENSEL

Selects software (SCRMENBPB) or hardware (input pin 118) control for enabling the
Scrambler.

Self-Sync

Controls selection of the self sync or frame sync signal for routing back to the PN
generator shift circuit.

S-RS

Controls whether the input data is to be scrambled then encoded by the Scrambler and
Reed-Solomon Encoder or whether it is to be encoded then scrambled.

Symbol Mapping

Selects one of five symbol mapping options when 16QAM modulation is selected.

Sets the error correction capability of the error correction encoding.

TCLK Sel.

Selects an externally generated clock for external control of data latching.

TRLSBF

Determines whether the first input bit is the MSB or LSB of the byte applied to the RS

Encoder.

Содержание STEL-2176

















































































Результаты поиска

Содержание STEL-2176

Отзывы:

Бренды по названию

Популярные бренды

Intel STEL-2176, Руководство пользователя

Результаты поиска

Содержание STEL-2176

Отзывы:

Бренды по названию

Популярные бренды