Intel SRMK2 - Server Platform - 0 MB RAM Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 115

background image

Intel® SRMK2 Internet Server Technical Product Specification

21

2.2.5 System Peripheral Bays

2.2.5.1

CD-ROM and Diskette Drive Bay

The right side of the system (as viewed from the front) contains the CD-ROM and diskette drive
bays. Opening the door in the bezel exposes these peripherals. A slim-line diskette drive is
provided with the system and a slim-line CD-ROM is an optional addition. For information on how
to add/remove the CD-ROM and floppy, please refer to the instruction sheet that comes with the
optional CD-ROM.

2.2.5.2

Internal 3.5” SCSI Hard Drive Bay

Space is provided for two 3.5” long, 1-inch thick hard drives. There are two removable Hudson
drive carriers provided that slide into two front disk drive bays on the front left side of the chassis
(behind the removable front bezel). Each drive can be accessed and replaced by removing the
front bezel, rotating the front panel out of the way (See Figure 3), releasing the handle on the
HDD carrier, and pulling the carrier from the drive bay. A pair of LEDs on the front panel flash
green to indicate drive activity for each drive (LED’s 8 and 9). In addition, the two SCSI HDD
bays are hot swappable.

2.2.6 System Interconnection

2.2.6.1

System Internal Cables

Table 11 lists the internal cables within the system. An

italicized

item is an optional accessory kit

and is not supplied with the base system.

Table 11: System internal cables

Cable Purpose

Qty

Description

SCSI hard drives

1

Standard 68-pin Wide SCSI cable with a LVD/SE terminator which connects
to the serverboard and the SCSI backplane

Front panel

1

50-pin flex cable; connects from front panel connector on the serverboard
to the front panel board.

Fan backplane

1

High density cable connects from the serverboard to the backplane to
provide system management monitoring of the system fans.

Slim-line diskette drive

1

26-pin flex cable; connects from high-density diskette drive connector on
the serverboard to one slim-line diskette drive

Slim-line CD-ROM
drive*

1

Standard 40-pin IDE cable with 2 connectors; connects from secondary IDE
connector on the serverboard to one slim-line CD-ROM drive

* Optional Accessory

«
...
19
20
21
22
23
...
»

Содержание SRMK2 - Server Platform - 0 MB RAM




















































































































Отзывы:

Нет отзывов

Похожие инструкции для SRMK2 - Server Platform - 0 MB RAM

Бренд: F5 Страницы: 2

WANJet 400 Appliance

Бренд: F5 Страницы: 11

Бренд: MSI Страницы: 107

Бренд: Axis Страницы: 10

Vlinx Serial Servers ESP901E

Бренд: B&B Electronics Страницы: 92

Бренд: Interface Masters Страницы: 34

301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...

Бренд: LaCie Страницы: 74

FusionServer XH321 V5

Бренд: xFusion Digital Technologies Страницы: 76

Бренд: hopf Elektronik GmbH Страницы: 178

Бренд: TRENDnet Страницы: 2

Бренд: TRENDnet Страницы: 2

TEW-P1UG - Wireless Print Server

Бренд: TRENDnet Страницы: 2

Бренд: TRENDnet Страницы: 15

SuperServer 520P-WTR

Бренд: Supermicro Страницы: 114

SuperStorageSystem SSG-5019D8-TR12P

Бренд: Supermicro Страницы: 131

5325302053 - Snap Server 720i NAS

Бренд: Adaptec Страницы: 238

Бренд: UNIVIEW Страницы: 30

Бренд: Mirapoint Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды