Intel M70KLP Series Скачать руководство пользователя страница 68

Страница: 68 / 109

Intel® Server System M70KLP Family Service Guide

5.5.1

Drive Removal

Figure 83. Front Drive Bay - Drive Extraction

Remove the drive carrier from the system.

•

Push the button to release the drive carrier latch (see Letter A).

•

Using the latch, pull the drive carrier from the drive bay (see Letter B).

Figure 84. 2.5" Drive Removal from Drive Carrier

Remove the drive from the drive carrier.

•

Using a Phillips head screwdriver, remove the four screws holding the drive to the drive carrier
(see Letter A).

•

Remove the drive from the drive carrier (see Letter B).

If the drive is not being replaced with another, then a drive blank insert must be installed to the drive carrier
before reinstallation into the drive bay.

The drive blank insert includes lock pins and lock tabs as alignment and locking features to ensure secure
placement within the drive carrier.

Содержание M70KLP Series














































































































Результаты поиска

Содержание M70KLP Series

Отзывы:

Похожие инструкции для M70KLP Series

Бренды по названию

Популярные бренды

Intel M70KLP Series, Руководство по обслуживанию

Результаты поиска

Содержание M70KLP Series

Отзывы:

Похожие инструкции для M70KLP Series

Бренды по названию

Популярные бренды