Intel M70KLP Series, Руководство по обслуживанию

Страница: 15 / 109

Intel® Server System M70KLP Family Service Guide
13
2. System Access and Cable Routing
Most procedures documented in the following chapters will require access to the inside of the system. This
chapter provides step-by-step instructions for the removal and reinstallation of both the system top cover
and the system air duct.
In addition, as this server family can support many different system configurations where several internal
cables may be necessary, this chapter will provide guidance for best cable routing using features designed
into the chassis.
Before You Begin
Before integration of any system components, review all the safety and ESD precautions found in the Safety
Warnings section at the beginning of this document.
System Reference
In the following procedures, all references to left, right, front, top, and bottom assume the reader is facing
the front of the server chassis.
Instruction Format
Each procedure described in this chapter follows an illustration first format. This format gives the reader the
option to follow a quicker path to completing the objective by first seeing an illustration of the intended
procedural step or steps. If necessary, the reader can follow the step-by-step instructions that follow each
illustration.
2.1 System Top Cover and Air Duct – Removal
Required Tools and Supplies
• Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* (cross head) screwdriver #1
2.1.1 System Top Cover Removal
Before removing the top cover, power down the system and unplug all power cables. The only exception to
this requirement is when hot swapping a failed system fan. See
Section 5.1 for fan replacement information.