Intel M70KLP Series, Руководство по обслуживанию

Страница: 43 / 109

Intel® Server System M70KLP Family Service Guide
41
3.3 Front 2.5” Drive Installation
The front drive bay may have support for 8, 16, or 24 drive bays. Each drive bay will include a drive carrier
that must be populated with a
2.5” drive (SSD or HDD) or supplied drive blank. All drives attached to a
common backplane must match media type (SSD or HDD). Mixing drive storage media types within a
common backplane is not supported. In addition, all drives attached to a common backplane must share a
common interface type (SATA/SAS or NVMe*).
Note: To support proper airflow requirements within the system, all drive carriers installed within the front
drive bay must be populated with a drive or supplied drive blank insert.
Drive carrier removal from the chassis and installation into the chassis is tool-less. However, mounting a
drive into the drive carrier requires a Phillips* head screwdriver.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips head screwdriver
Figure 46. Front Drive Bay Drive Carrier Removal
1. Remove the desired drive carrier from the chassis.
• Push the button to release the drive carrier latch (see Letter A).
• Using the latch, pull the drive carrier from the drive bay (see Letter B).
Figure 47. Drive Blank Removal
2. Remove the drive blank from the drive carrier – No tools required.
• Gently spread apart the carrier slide rails and slide out the drive blank