Intel® Server System M50FCP1UR System Integration and Service Guide
35
3.3.1
Riser Card Bracket Removal
As shown in the previous figures, there are multiple types of riser card brackets included with the system.
The instructions for installation are the same for each.
Figure 31. Chassis Riser Card Bracket Screws Removal
1.
Power off the system and disconnect the system power cords.
2.
Remove the system top cover. See
Section 3.1.1
3.
If present, disconnect all cables (internal or external) that may be attached to the riser assembly.
4.
If present, remove the four fastener screws on the chassis back panel. See
Figure 31
.
Figure 32. Riser Card Bracket Removal
5.
On the front and back of the riser card bracket, loosen the two screw heads securing the bracket to
the server board. See Letter A.
6.
Grasp the riser card bracket with both hands and carefully pull it up and away from the chassis.
See Letter B.
3.3.2
Riser Card Installation
The following installation procedure for riser card to bracket is the same for all included riser card brackets
and supported riser card options.
Figure 33. Riser Card Installation onto the Bracket
Содержание M50FCP1UR
