Intel M50FCP1UR, Руководство пользователя

Страница: 30 / 133

Intel® Server System M50FCP1UR System Integration and Service Guide
30
2. Ensure that the ejection tabs at both ends of the memory slot are pushed outward to the open
position (see Letter A).
3. Carefully unpack the replacement memory module, taking care to handle the device by its outer
edges.
4. Align the notch at the bottom edge of the memory module, with the key in the memory slot
(see Letter B).
5. Insert the memory module into the memory slot.
•
Using even pressure along the top edge, push down on the memory module (see Letter C) until
the ejection tabs of the memory slot snap into place (see Letter D).
6. Ensure that the ejection tabs are firmly in place (see Letter E).
7. Repeat the procedure for each memory module to be installed.
Note: Intel® Optane™ PMem devices require additional steps to enable and configure them. Refer to the
appropriate Intel® Optane™ PMem documentation to complete the installation process.
2.5 Power Supply Module Installation
Required Tools and Supplies
•
Intel power supply kit
• Anti-static wrist strap and conductive workbench pad (recommended)
Figure 23. Power Supply Installation
1. If present, remove the insert from the power supply bay (see Letter A).
2. Locate and carefully unpack the power supply module.
3. Slide the power supply into the power supply bay until it locks in place (see Letter B).
Note: The power supply bay filler panel must be installed in the unused bay for all single power
supply configurations.
4. (If installing a second power supply–Repeat steps 1–3.