Intel Ethernet 10G 2P X520 Adapter Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 153

background image

DKMS RPMs are provided for supported Linux distributions and are named ixgbevf-<driver_version>-
<type>.noarch.rpm

<driver_version> and <type> are specific to the driver version you are using:

l

<driver_version> is the driver version number; e.g., 6.2.xy.

l

<type> is either "sb_dkms" for packages that contain both source and binaries, or "bo_dkms" for packages that
contain binary-only modules.

The naming convention for the included DKMS RPMs is:

<component name>-<component version>-<type>.noarch.rpm

For example, ixgbevf-x.y.z-sb_dkms.noarch.rpm: ixgbevf is the component name; x.y.z is the component version; and
sb_dkms is the type.

NOTE:

If you have a previous RPM installed, it must be uninstalled before installing the new RPM. To determine

whether or not a previous RPM is installed, enter rpm -q ixgbevf.

To install the DKMS RPM, use this command:

rpm -i <filename>

To uninstall the RPM, use this command:

rpm -e <package>

Install Using KMP RPM

NOTE:

KMP is only supported on SLES11.

The KMP RPMs update existing ixgbevf RPMs currently installed on the system. These updates are provided by SuSE
in the SLES release. If an RPM does not currently exist on the system, the KMP will not install.

The RPMs are provided for supported Linux distributions. The naming convention for the included RPMs is:

intel-<component name>-<component version>.<arch type>.rpm

For example, intel-ixgbevf-1.3.8.6-1.x86_64.rpm: ixgbevf is the component name; 1.3.8.6-1 is the component version;
and x86_64 is the architecture type.

KMP RPMs are provided for supported Linux distributions. The naming convention for the included KMP RPMs is:

intel-<component name>-kmp-<kernel type>-<component version>_<kernel version>.<arch type>.rpm

For example, intel-ixgbevf-kmp-default-1.3.8.6_2.6.27.19_5-1.x86_64.rpm: ixgbevf is the component name; default is
the kernel type; 1.3.8.6 is the component version; 2.6.27.19_5-1 is the kernel version; and x86_64 is the architecture
type.

To install the KMP RPM, type the following two commands:

rpm -i <rpm filename>

rpm -i <kmp rpm filename>

For example, to install the ixgbevf KMP RPM package, type the following:

rpm -i intel-ixgbevf-1.3.8.6-1.x86_64.rpm

rpm -i intel-ixgbevf-kmp-default-1.3.8.6_2.6.27.19_5-1.x86_64.rpm

«
...
104
105
106
107
108
...
»

Содержание Ethernet 10G 2P X520 Adapter


























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Ethernet 10G 2P X520 Adapter

Бренд: comPPage Страницы: 38

Бренд: Atheros Страницы: 28

Бренд: Addonics Technologies Страницы: 4

Бренд: CICH International Страницы: 7

Бренд: VOLTCRAFT Страницы: 4

Бренд: Atlantis Страницы: 24

Бренд: Magma Страницы: 32

Бренд: ProTek R/C Страницы: 2

Бренд: Edimax Страницы: 19

Бренд: NTI Страницы: 12

Бренд: U.S. Converters Страницы: 9

Бренд: SWEEX Страницы: 4

Бренд: Hawking Страницы: 25

Бренд: Dynalink Страницы: 110

Бренд: EnGenius Страницы: 45

Бренд: Belkin Страницы: 60

Бренд: Extron electronics Страницы: 2

Бренд: Innoviti Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды