Instantel 716A0401, Руководство оператора

Страница: 75 / 86

Appendix
MiniMate Plus Operator Manual
A-5
Accessories
MiniMate Plus to BlastMate III Cable: RS–232 cable for programming MiniMate Plus from BlastMate III 716A1801
BlastMate III replacement Printer Paper Roll (Package of 10) TP5000–80–25C
Remote Alarm 711A1401
DS 20 Wire Trigger 677A3901
BlastMate Trigger Cable 712A3901
Null Modem Cable for connecting between unit and modem 714A7501
Accessory case with rigid foam insert. Same as BlastMate case. Used to carry and store accessories. Can also
be used to store and carry 1–2 MiniMate Plus units 714A2601
c) Compliance Reports
The MiniMate Plus supports numerous Compliance Reports, also called National Frequency
Analysis Standards, including U.S.A. USBM/OSMRE, British Standard BS 6472, French GFEE,
German DIN 4150, New Zealand 4403:1976, and Spain UNE 22.381. Two frequency standards,
U.S.A. USBM/OSMRE and German DIN 4150, appear below. Use the BlastWare III software to
choose the Compliance Report used by your monitor.
Figure A–1 United States Bureau of Mines and German DIN 4150 Compliance Reports.
Note: Data points appearing outside of the report boundaries indicates the recorded data was
outside the range of the report. In the DIN 4150 example, some peaks occurred at
frequencies greater than 100 Hz and were therefore drawn outside the boundaries of the
report.
Using the optional BlastWare III Advanced Module, you can edit Compliance Reports or create
an entirely new report to meet your specific needs.