Compliance Module
MiniMate Plus Operator Manual
3–13
To set the histogram interval, ensure you have chosen the histogram record mode. Press the
Setups
key when the Main Window is displayed. Press the
Enter
key repeatedly until the
Histogram Interval Window appears. Press the
Up
or
Right
Arrow
keys to select an interval. The
available intervals are 2, 5, and 15 seconds and 1, 5, and 15 minutes. Press the
Enter
key to save
your setting.
Note:
When exiting the histogram record mode, the last incomplete interval may not be saved. If
the password feature is enabled, the last few intervals may not be saved.
3.8.9. Record Time
The Record Time sets the length of time in seconds that the unit records if you have a selected a
Fixed record stop mode. Once the record time has elapsed, the monitor stops recording. The
maximum record time is displayed by the unit. Note that the maximum record time while in
Histogram Combo Mode is 13 seconds.
3.8.10. Notes Format
The notes format lets you include notes describing an event or not. You write the notes using the
BlastWare III software and then copy them to the MiniMate Plus. Press the
Option
and
Test
keys
together to review setups and see if notes are presently stored in the MiniMate Plus and what these
notes are.
To set the notes format, press the
Setups
key when the Main Window is displayed. Press the
Enter
key to scroll though the windows until the Notes Format Window appears. Use the
Right
Arrow
key to display the two settings. The Use Notes setting records your notes with an event. If
you choose the Use Blank Text Notes choice, only blank text lines record with an event leaving
you space to manually write in notes after you have printed the event.
3.8.11. Job Number Format
You may include a job number for each recorded event. Job numbers help you keep track of
events stored in the MiniMate Plus or in a computer. Job numbers range from 1 to 9999.
To display the Job Number Format Window, press the
Setups
key when the Main Window is
displayed. Press the
Enter
key to scroll through the windows until the Job Number Format
Window appears. Press the
Right Arrow
key to display the two choices: Use Job Number or
Don’t Use Job Number. Press the
Enter
key to select a setting when it appears on the display.
If you chose the Use Job Number setting, after pressing the
Enter
key the Job Number Window
appears. Press the
Right Arrow
key to position the cursor and the
Up Arrow
key to edit the four
digit job number to the desired number. Press the
Enter
key to save the job number.
3.8.12. Scaled Distance
Scaled distance information can be saved with each event. The scaled distance information
includes two factors: Distance from blast and Charge Weight. The Distance from blast factor is
the measured distance from the blast charge to the monitor’s sensors. The charge weight is the
physical weight of the charge used.
To enter scaled distance information, press the
Setups
key when the Main Window is displayed.
Press the
Enter
key to scroll through the windows until the Scaled Distance: Window appears.
Press the
Up Arrow
key to display the Use Scaled Distance Window. Press the
Enter
key. The
Distance from blast Window appears. Use the
Arrow
keys to enter the distance from the blast to
the monitor’s sensors then press the
Enter
key. The Charge weight Window appears. Use the
Arrow
keys to enter the charge weight and press the
Enter
key to save your setting.
Содержание 716A0401
