Instantel 716A0401, Руководство оператора

Страница: 40 / 86

Chapter 3
3–20
MiniMate Plus Operator Manual
while the monitor is in monitor mode, waiting for a trigger. See the section explaining the Enter
key, above.
By default, event data appears in the following order. If you viewed event data before, the data
last displayed when you stopped viewing events appears first the next time you view events.
Channels 5, 6, 7, and 8 require an eight channel monitor.
1. Peak Particle Velocity (PPV) and Air Pressure.
W:Jan 25 99 10:17:47
3.78 mm/s 37 Hz
57.5 pa. (L) 7.2 Hz
↑ ↓ = previous = next
Time
Air Pressure
Date
PPV
On-line Help
2. Velocity or air pressure results along with the frequency for all channels, displayed
in pairs, beginning with channels 1 and 2. For advanced events, the velocity result
appears only. Frequency is not calculated for advanced events.
W:Jan 25 99 10:17:47
1: 2.91 mm/s 32 Hz
2: 3.78 mm/s 37 Hz
= previous = next ↑ ↓
PPV and
Frequency
Channels
3. Acceleration and peak displacement results for each channel displayed individually.
W:Jan 25 99 10:17:47
1: Accel .059 g
Pk Disp .014 mm
= previous = next ↑ ↓
Peak
Displacement
Channel
Acceleration
4. Peak vector sum results for channels 1, 2, 3 and channels 5, 6, 7 (eight channel
monitor required).
W:Jan 25 99 10:17:47
PVS 123: 4.73 mm/s
= previous = next
↑ ↓
Peak
Vector Sum
Channels
5. PPV for all enabled channels expressed in decibels, and Air Pressure. (Units with a
serial number of 6000 or higher only.)
W:Jan 25 99 10:17:47
51.2 dB 3.2 Hz
= previous = next
57.5 pa. (L) 7.2 Hz
↑ ↓
Decibels
Air Pressure
Figure 3.16 The View Event Window.
3.10.2. Delete All Events
Deleting all the events stored in the MiniMate Plus frees up internal memory space in order to
record additional events.